Filter
Top Products
Configure an Avaya Meeting Exchange 5.0.1 S6800 Bridge
Issue 3 January 2008 103
Figure 26: Example of Page 3 of the IP Network Region Form
8. Set codec set to the appropriate codec set you defined.
9. Set Units to NoLimit for each destination IP network region. You can set unlimited
bandwidth or use the bandwidth management option by restricting the bandwidth.
10. Repeat Steps 1 through 9 for each IP network region that will be used for video in this
system.
Procedure 3: Add an Entry in the IP Node Names for the Meeting Exchange
System
To add an entry in the IP Node Names form for the Meeting Exchange system:
1. Use the change node-names ip command to access the IP Node Names form.