Filter
Top Products
Setting Up Video Endpoints
130 Avaya Video Telephony Solution Networking Guide
Procedure 5: Create a Route Pattern for the PathNavigator/SE200
To create a route pattern that points to the trunk group:
1. Use the change route-pattern xx command (where xx is the route pattern you want to use)
to access the Route Pattern form.
The Route Pattern form appears.
2. In the Grp No field, enter the number of the trunk group you created for the PathNavigator/
SE200.
Procedure 6: Configure the PathNavigator/SE200
Follow the instructions provided with the system to install and configure the Polycom
PathNavigator/SE200.