Filter
Top Products
Setting Up Video Endpoints
66 Avaya Video Telephony Solution Networking Guide
Procedure 1: Add an Entry in the IP Node Names for the RMX System
To add an entry in the IP Node Names form for the RMX system:
1. Use the change node-names ip command to access the IP Node Names form.
2. In the Name field, enter a name for the RMX system.
3. In the corresponding IP Address field, enter the IP address of the signaling host for the RMX
system.
Procedure 2: Add a Two-Way Trunk Group for the RMX System
To add a two-way trunk group for the RMX system:
1. Use the add trunk-group xx command (where xx is the chosen trunk group) to access the
Trunk Group form.
The Trunk Group form appears.
Figure 12: Example of Page 1 of the Trunk Group Form
2. Set Group Type to isdn.
3. Set Direction to two-way.