Filter
Top Products
Configure Video Trunks between Two Avaya Communication Manager Systems
Issue 3 January 2008 133
Procedure 4: Modify the Signaling Group
To modify the signaling group video trunk:
1. Use the change signaling-group xx command (where xx is the signaling group you
added) to access the Signaling Group form.
The Signaling Group form appears.
2. Set Trunk Group for Channel Selection to the trunk group you just added.
Procedure 5: Create a Route Pattern for the Video Trunk
To create a route pattern that points to the trunk group:
1. Use the change route-pattern xx command (where xx is the route pattern you want to use)
to access the Route Pattern form.
The Route Pattern form appears.
2. In the Grp No field, enter the number of the trunk group you created.