Avaya 16-601423 Webcam User Manual


 
Configure an Avaya Meeting Exchange 5.0.1 S6800 Bridge
Issue 3 January 2008 121
Procedure 9: Configure Avaya SES for Meeting Exchange 5.0.1 S6800
To configure Avaya SES for Meeting Exchange:
1. Log into the Avaya SES Administration interface (http://<ses-ipaddress>/admin) and verify
that the SES is set up as a Home/Edge proxy. Other configurations are possible with
multiple SES proxies. Select Server Configuration>System Properties, and verify that
SIP Domain is set to the domain name administered on the Avaya Communication Manager
signaling group.
2. For each SIP station, add a user on SES. (Select Users>Add.)
3. Add a media server interface. (Select Media Server>Add.) Be sure to set the following
parameters:
Media Server Interface Name to the Avaya Communication Manager node name for its
CLAN.
SIP Trunk Line Type to TLS.
SIP Trunk IP Address to the IP address of the CLAN interface.
Media Server Admin Address to the IP address to access SAT.
Media Server Admin Login to init.
Media Server Admin Password to the init password.
Media Server Admin Password Confirm to the init password.
The following figures shows an example of the media server interface settings.