Filter
Top Products
Setting Up Video Endpoints
106 Avaya Video Telephony Solution Networking Guide
Procedure 5: Add a SIP Trunk Group for the Meeting Exchange System
You must administer a SIP trunk group for the Meeting Exchange system.
Perform the following steps:
1. Use the add trunk-group xx command (where xx is the chosen trunk group) to access the
Trunk Group form.
The Trunk Group form appears.
Figure 29: Example of Page 1 of the Trunk Group Form
a. Set Group Type to sip.
b. Set Group Name to the name of the Meeting Exchange system (for example, Avaya
Meeting Exchange 5.0.1 SIP Bridge).
c. Set COR.
d. Set Direction to two-way.
e. Set Outgoing Display to y to display caller ID (from the Station form).
f. Set Service Type to tie.
g. Set Signaling Group to the signaling group you created for the Meeting Exchange
system.
h. Set Number of Members.