Filter
Top Products
Configure an Avaya Meeting Exchange 5.0.1 S6800 Bridge
Issue 3 January 2008 105
Figure 28: Example of Page 1 of the Signaling Group Form
2. Set Group Type to sip.
3. Set Transport Method to tls or tcp.
4. Set IP Video to y.
5. Set Priority Video as appropriate.
6. Set Near-end Node Name. For example, for an S8300 system, you would enter procr. For
an S8500 or S8700 system, you would enter the name of the CLAN board.
7. Set Near-end Listen Port to 5061 or 5060.
8. Set Far-end Node Name to the name you entered for the Meeting Exchange system.
9. Set Far-end Listen Port to 5061 or 5060.
10. Set Far-end Network Region to the network region you specified for the Meeting
Exchange system.
11. Set Session Establishment Timer (min) to 120.
12. Set DTMP over IP to in-band.
13. Set Enable Layer 3 Test to n.
14. Set Direct IP-IP Audio Connected to y.