Filter
Top Products
Configure a Station Endpoint for Avaya IP Softphone Release 6.0 and Video Integrator
Issue 3 January 2008 53
Configure a Station Endpoint for Avaya IP Softphone
Release 6.0 and Video Integrator
This section describes how to enable video calls for a desktop user.
Note:
Note: Users must install Avaya IP Softphone Release 6.0 and Video Integrator on their
PCs before they can handle video calls from their desktops.
Checklist
When setting up video calls for a desktop, you will need to know the following information:
● the station number of the desktop user
● the IP codec sets you want to use
● the IP network regions you want use
Configuration Procedures
To configure a station to use Avaya IP Softphone R6.0 and Video Integrator, you must perform
the following steps:
1. Determine the maximum number of video-capable Avaya IP Softphone endpoints your
voice system supports.
2. Configure the Class of Service if you want to use priority video calling.
3. Add a new station or modify an existing station that will use Avaya IP Softphone for video.