Filter
Top Products
SIP Station Administration (OPTIM)
Issue 3 January 2008 45
SIP Station Administration (OPTIM)
Question 1: Is the IP station configured to use video?
Verify that the fields have been configured correctly on page 1 of the station form. "IP
Video?" must be set to "y."
Yes.
No. Expect no video media if video is disabled for the station.
Question 2: Is the IP station configured to use direct media?
Verify that the fields have been configured correctly on page 2 of the station form. "Direct
IP-IP Audio Connections?" must be set to "y."
Yes.
No. Expect no video media if direct media is disabled for a station.
Question 3: Is the station type correct for the SIP endpoint being
administered?
Verify that the fields have been configured correctly on page 1 of the station form. "Type"
must be set to "4620SIP" or "96xx."
For Avaya endpoints, ensure that the set type matches. All OPTIM video endpoints should
use the "4620SIP" station type.
Yes.
No. An incorrect set type can cause registration failure or call setup failure.
Question 4: Is the OPTIM call limit configured to allow the number of
simultaneous call appearances required by the endpoint?
Verify that the fields have been configured correctly on page 2 of the off-pbx-telephone
station-mapping form. "Call Limit" should be set to the number of extensions/line
appearances.
Yes.
No. Certain station features may be unavailable, or multipoint capabilities may not work as
expected.