Filter
Top Products
Configure Polycom VSX/HDX Series Video Conferencing Systems and V500/V700 Video Calling Systems
Issue 3 January 2008 57
Configure Polycom VSX/HDX Series Video Conferencing
Systems and V500/V700 Video Calling Systems
Use this procedure to configure Polycom VSX/HDX series video conferencing systems and
V500 and V700 video calling systems.
Checklist
When setting up these systems, you will need to know the following information:
● maximum number of VSX/HDX, V500, and V700 systems on your network
● PIN for each VSX/V500/V700 system. The PIN can consist of a maximum of eight numeric
characters and is defined by the System Administrator.
● the key code that combines the Avaya option with any other Polycom options.
● whether the VSX/HDX system has the multipoint option or IMCU option. If so, you must
combine the Polycom Software License for this capability with the “Avaya Option” Polycom
Software License to create a single Key Code to input into the unit.
● IP address of the voice system
● the IP codec sets you want to use
● the IP network regions you want use
Configuration Procedures
To configure Polycom VSX/HDX series video conferencing systems and V500/V700 video
calling systems, you must perform the following steps:
1. Determine the maximum number of video-capable H.323 stations your voice system
supports.
2. Configure the Class of Service if you want to use priority video calling.
3. Add a new station for the Polycom system.
4. Configure the Polycom system.