Filter
Top Products
Setting Up Video Endpoints
108 Avaya Video Telephony Solution Networking Guide
The following is an example of a TCP configuration:
# ip address of the server
IPAddress=xxx.xxx.xxx.xxx
#request we will be listening to
MyListener=sip:6000@xxx.xxx.xxx.xxx:5060;transport=tcp
#if this setting is populated will Overwrite the contact field in responses
respContact=<sip:6000@xxx.xxx.xxx.xxx:5060;transport=tcp>
#Audio port licensing depends on customer
MaxChannelCount=750
# video port licensing depends on customer
MaxVideoChannelsAllowed=125
2. Using a text editor, open the file /usr/ipcb/config/mediaServerInterface.cfg, and make sure
the following parameters are configured:
● EnableVideoSupport
Valid entries are 0 (off) and 1 (on). The default is 0.
● VideoSI
This parameter sets the switching interval. Valid entries are 1 through 10 seconds. The
default is 2.
● VideoSpeakersees
Valid entries are current and previous. The default is previous.
● VideoSize
Valid entries are CIF and QCIF. The default is CIF.
● VideoBandwidth
Valid entries are 128, 192, 256, 384, 512, and 768 Kbit/s. The default is 384 Kbits/s.
● VideoMPI
This parameter sets the minimum picture interval. Valid entries are 1 through 32. The
default is 4. (VideoMPI=1 equals 30 fps.)