Filter
Top Products
17. Removal of the projector covers
Image 17-2
17.2 Removal of the side cover
CAUTION: Remove the side cover of the projector only in a clean and dust free area. Never remove the side
cover in an area which is subject to airborne contaminants such as that produced by smoke machines or
similar.
Necessary tools
7mmflat screw driver.
How to remove the side cover of the projector ?
1. Release the captive screw at the middle bottom of the side cover, using a fl at screw driver.
Image 17-3
2. Remove the side cover from the projector doing the following:
a) gently pull out the bottom corners (A) of the side cover,
b) then gently pull out the top corners (B) of the side cover,
c) then move the side cover away from the projector (C).
Image 17-4
194 R5976921 FLM R20+ PERFORMER 15/03/2010