Barco R9010270 Projector User Manual


 
8. Image Menu
How to change the Phase ?
1. Press MENU to activate the menu bar. (image 8-10)
2. Press to select the Image item.
3. Press to pull down the Im age menu.
4. Use or to select setting s.
5. Press to pull down the menu.
6. Use or to select Phase.
7. Press ENTER .
A slider box appears.
8. Use or to change the Phase and refine the jitter.
Or,
click in the input box and enter the desired value with the numeric keys.
Note: Don’t mix up with wrong number of total pixels. If the jitter doesn’t disappear with the phase adjustment, check the total
number of pixels. (Best image = pixel on pixel off pattern. For exam ple: shut down screen of a PC)
Image 8-10
8.2.8 Noise reduction
About Noise reduction
Reduces noise and pixel jitter in all video sources.
How to change the Noise reduction ?
1. Press MENU to activate the menu bar. (image 8-11)
2. Press to select the Image item.
3. Press to pull down the Im age menu.
4. Use or to select setting s.
5. Press to pull down the menu.
6. Use or to select Noise reduction.
7. Press ENTER .
A slider box appears
8. Use or to change the noise level.
The higher the value, the higher the noise reduction.
Or,
click in the input box and enter the desired value with the numeric keys.
68
R5976816 RLM R6+ PERFORMER 02/06/2006