Filter
Top Products
XX
To lift the printer, face the front of the printer and grip the recessed areas at the bottom left
and right with both hands. Never try to lift the printer by gripping any other areas. Lifting the
printer by gripping other areas can cause the printer to fall, resulting in injuries.
When lifting the printer, get a firm footing and bend your knees to avoid possible injuries to
your back.
Do not move the printer by lifting it by the front and back edges (positions shown in the
following illustration) when the paper tray is extended (loaded with Legal 14 paper). The
printer may fall and result in injuries or the paper tray may be damaged.
The printer has ventilation grilles on the side and at the back of the machine. Ensure that
the printer is installed no less than 300 mm (11.7 in.) from the wall on the right, 200 mm (7.8
in.) from the wall on the left, and 255 mm (9.9 in.) from the wall at the back. A poorly
ventilated printer can cause excessive internal heat to build up and result in fire.
The illustration below shows the minimum clearances required for normal operation,
consumables replacement, and maintenance ensuring that your printer operates at peak
performance.
When moving the printer, be sure to unplug the power cord from the AC power
outlet/socket. Moving the printer with the power cord connected can damage the power
cord, which could result in a fire or an electric shock.
200 mm
402 mm
255 mm
300 mm