Filter
Top Products
2 - 20 USABLE PAPER TYPES AND PRINTING METHOD
Load Labels, Transparencies and Other Special Paper in the Paper
Tray
Types of special paper to avoid
Do not use paper that is damaged, curled, wrinkled or an unusual shape.
■ Before using paper that has holes in it, such as organizer sheets, you must 'fan' the stack to
avoid paper jams and misfeeds.
■ Do not use paper with perforations (holes) at the edges.
■ Do not put the punched holes near the actuator (paper sensor).
■ Do not use organizer sheets that are stuck together. The glue that is used might damage the
printer.
■ Do not load different types of paper at the same time in the paper tray because it may cause
paper jams or misfeeds (except for transparencies) (See Printing on Transparencies from the
Paper Tray on page 2-23).
■ For proper printing, you must choose the same paper size from your software application as the
paper in the tray.
■ If your application software does not allow you to select the paper size in its PRINT menu, you
can use the control panel Menu buttons to go to the PAPER menu to change the paper size. For
more information, see PAPER on page 4-13.
Use transparencies that are designed for use in laser printers and for black and white printing only.
■ Transparencies for full-color printing cannot be loaded. Using unsuitable transparencies may
lead to a printer malfunction.
■ If the output transparencies are allowed to stack up in the center output tray, paper jams may
occur due to static electricity.
Remove the transparencies from the tray as soon as they exit the printer.