Filter
Top Products
2 - 26 USABLE PAPER TYPES AND PRINTING METHOD
Changing the Configuration for Options
Once you set the initial configuration of the printer, you must reconfigure the printer driver when you
install the following options:
1. Lower tray units (up to two LT-8000)
2. Memory expansion
3. Duplex unit (DX-8000)
4. Offset Catch Tray (CT-8000)
For details about how to install options, see the instructions provided with the options. In the following
section, it is assumed that the options are already installed.
Memory expansion
In general, DIMM must have the following specifications:
Type: 100 pin and 32 bit output
CAS latency: 2 or 3
Clock frequency: 66 MHz or more
Capacity: 16, 32, 64, 128 or 256 MB
Height: 46 mm (1.8 in.) or less
Parity: NONE
Dram Type: SDRAM 4 Bank
SDRAM can be used.
■ For more information, call the dealer you bought the printer from.
■ For the latest information and drivers, visit the Brother Solutions Center at
http://solutions.brother.com
1
2
3
4