Filter
Top Products
XXI
When moving the printer, do not tilt it more than the angles shown in the illustration below.
If tilted excessively, the printer may fall, resulting in injuries.
■ Use the printer in a place that meets the following requirements:
Ambient temperature range of 10 to 32 °C (50.0 to 89.6 °F), relative humidity of 15 to 85% (no
condensation)
When using the printer at an ambient temperature of 32 °C (89.6 °F), the relative humidity should not
exceed 65%. When the relative humidity reaches 85%, the ambient temperature should not exceed
28 °C (82.4 °F).
■Do not place the printer in a room where there are sudden fluctuations in temperature and
do not move the printer from a cold place to a warm humid place. If you do, condensation
may occur inside the printer and deteriorate print quality.
■Do not place the printer in direct sunlight, as this may damage the printer.
■When moving the printer, remove the toner cartridge.
■Do not place the printer directly next to an air conditioner or heater, as this affects the
temperature inside the printer and can cause damage.
■Do not use the printer when it is tilted at an angle of more than 5 degrees, as this may
result in damage.
Operating Environment
10°
10°
10°
10°