Filter
Top Products
CHAPTER 10 BANYAN VINES NETWORK CONFIGURATION
10-5
13.
You will get the Output strings menu. This screen allows you to define
strings of characters that can be sent before and after the print job to put the
printer in a particular state (for example, duplex mode). The default values
will work OK for most applications. However, if you are printing text files
directly from the DOS prompt, you should define a Post-job string such as \f
(formfeed) to insure that the paper is ejected (this is generally not needed
with DOS or Windows application programs, since the program or drivers
reset the printer after each job, and it may cause problems with binary
graphics files). Press F10 to accept the output string values.
14.
You will then get the Enable strings menu. This menu allows you to select
whether or not a banner page is printed, whether or not to use the setup and
reset strings, and other options. Choose the desired options or press F10 to
select the defaults.
15.
You will be asked, "Would you like to add another destination at this time?"
Select No.
16.
You will then get the Print Queue Status screen, which will show that the
queue is not accepting jobs or printing jobs. Change both values to Yes and
then press F10. You will get the message that the queue is now ready to
accept and print jobs. Press F10 again.
17.
If you are configuring more than one queue on the file server, repeat steps 1
through 17 of this section. Otherwise, press ESCAPE multiple times to exit
the MANAGE utility.