Brother NC-4100H Network Card User Manual


 
CHAPTER 8 DLC PRINTING
8-2
Configuring DLC on Windows NT/2000
To use DLC on Windows NT, you must first install the DLC protocol.
1.
Log into Windows NT with administrative privileges. Go to the NT Control
Panel and double click on the Network icon. Windows 2000 users select the
properties of the Local Area Connection.
2.
On Windows NT 3.5x systems, select Add Software. On Windows NT 4.0
systems, click on the Protocol tab, and click Add. Windows 2000 users click
the Install button from the General Tab.
3.
Select DLC Protocol and then OK or Add if using Windows 2000. You may
be asked for the location of the files, for Intel based computers, the
necessary files are stored in the i386 directory of the Windows NT CD-
ROM. If you have a non-Intel platform, specify the correct directory on your
Windows NT CD-ROM. Click Continue (for 3.5x systems) or Close (for 4.0
systems).
4.
Reboot your system to make the change take effect. Windows 2000 should
not require a re-boot.