Filter
Top Products
CHAPTER 8 DLC PRINTING
8-4
Windows NT 4.0 Printer Setup
Log into Windows NT with administrative privileges. From the Start menu, select
Settings and then Printers.
1.
Select Add Printer (If you have already installed a Brother printer driver,
double click the printer driver that you wish to configure and then select
Printers/Properties, select the Ports tab and continue from Step 4 (ignoring
steps 9-11) about installing the correct driver).
2.
Select My Computer and then click Next.
3.
Select Add a Port.
4.
Select Hewlett-Packard Network Port and then click New Port.
5.
A list of available print server MAC addresses (Ethernet addresses) appears
in the larger box under Card Address. Select the address of the desired print
server (you can see the Ethernet address on the printer configuration page)
You can find the node name and MAC address by printing out the printer
configuration page. Refer to the Quick Setup Guide for information on how to print
the configuration page on your print server.
6.
The selected print server address will then appear in the smaller box under
Card Address.
7.
Type in any desired name for the port (the name must not be the name of an
existing port or DOS device, such as LPT1) and click OK then on the Printer
Ports screen, click Close.
8.
The name you selected in the above step will appear as a checked port in the
list of available ports. Click Next.
9.
Select the correct driver click Next.
10.
Give a name to the printer. If desired, select the printer as the default.
11.
Select Shared or Not Shared. If shared, specify the share name and operating
systems that will be printing to it.
12.
Select whether or not you want a test page, and then select Finish.