Filter
Top Products
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-3
Brother Internet Print
Configuring the Brother Print Server
The print server can be configured with BRAdmin configuration utility, by using a
web browser, or by using the TELNET command.
Print Server Configuration Checklist
Before configuring the print server to receive BIP jobs, be sure that the E-mail server
at the remote site (the receiving end) is configured to handle the TCP/IP POP3, and
SMTP protocols (SMTP is only required if the notification feature is enabled).
1.
Configure the POP3 server on the E-mail server at the remote site with a
mail account (Mailbox name) and password for the Brother print server
(generally, the mail account name will be the first part of the Email address;
for example, if you assign the Email address emailprinter@xyz.com, then
the mail account name would be emailprinter).
2.
Make sure that the print server is installed and running with TCP/IP enabled
and has a valid IP address assigned to it.
Because access to the E-mail server on most networks is usually restricted, you may
need to have your network administrator check the configuration and add the mail
account.