Filter
Top Products
APPENDIX
A-10
Function Table and Default Factory Settings
Level One Function
Level Two Function Options Factory Setting
1.SETUP TCP/IP
1.BOOT METHOD AUTO/STATIC/RARP/BOOTP/DHCP AUTO
2.IP ADDRESS [000-255].[000-255].[000-255].[000-255] 192.000.000.192
3.SUBNET MASK [000-255].[000-255].[000-255].[000-255] 000.000.000.000
4.GATEWAY [000-255].[000-255].[000-255].[000-255] 000.000.000.000
5.HOST NAME (up to 15 characters) BRN_XXXXXX
BRN_XXXXXX=(last 6 figures of
Ethernet address)
6.WINS CONFIG AUTO/STATIC AUTO
7.WINS SERVER PRIMARY/SECONDARY
000.000.000.000/000.000.000.000 000.000.000.000
8.DNS SERVER
PRIMARY/SECONDARY
000.000.000.000/000.000.000.000 000.000.000.000
2.SETUP INTERNET 1.MAIL ADDRESS (60 characters)
brnxxxxxx@example.com
2.SMTP SERVER IP ADDRESS / NAME
[000-255].[000-255].[000-255].[000-255] 000.000.000.000
/ NAME (up to 30 characters)
3.POP3 SERVER IP ADDRESS / NAME
[000-255].[000-255].[000-255].[000-255] 000.000.000.000
/ NAME (up to 30 characters)
4.MAILBOX NAME (up to 20 characters)
5.MAILBOX PWD PASSWORD:******
VERIFY:******
(up to 20 characters)
3.SETUP MAIL RX 1.AUTO POLLING ON/OFF ON
2.POLL FREQUENCY 01 - 60 MIN 10 MIN
3.HEADER ALL/SUBJECT+FROM+TO/NONE NONE
4.DEL ERROR MAIL ON/OFF ON
5.NOTIFICATION ON/MDN/OFF OFF
4.SETUP MAIL TX 1.SENDER SUBJECT (up to 40 characters) Internet FAX Job
2.SIZE LIMIT ON/OFF ON
3.NOTIFICATION ON/OFF OFF
5.SETUP RELAY 1.RLY BROADCAST ON/OFF OFF
2.RELAY DOMAIN RELAYXX: 01
XX=01-10
RELAY01*YYYYY
YYYYY=(up to 30 characters)
3.RELAY REPORT ON/OFF OFF
6.SETUP MISC. 1.NETWARE ON/OFF *1 ON
2.NET FRAME *1 AUTO/8023/ENET/8022/SNAP AUTO
3.APPLETALK ON/OFF ON
4.DLC/LLC ON/OFF ON
5.NET BIOS/IP ON/OFF ON
6.ETHERNET
AUTO/100B-FD/100B-HD/10B-FD/10B-
HD
AUTO
7.TIME ZONE GMTXXX:XX GMT-5:00
XXX:XX=-12:00/-11:30.....+11:30/+12:00
*1: 'NET FRAME' setting is available when 'NETWARE' is 'ON'.