Filter
Top Products
CHAPTER 4 INTERNET FAX
4-3
Sending an Internet Fax
• Send the Internet Fax in the same way to send a fax.
If you have already programmed the addresses of the Internet Fax addresses into
the FAX/MFC as a One Touch or Speed Dial, you can send the Internet Fax in
the same way as you would send a normal fax.
You can select your preferred resolution by selecting the Fax Resolution key on
the panel before sending the Internet Fax. But you cannot send the color
document.
• Send the Internet Fax with the Scan to E-mail button (only for the
models with the Scan to keys).
1. Set the document that you wish to send in the auto feeder of
the Brother FAX/MFC.
2. Press the Scan to E-mail button on the control panel of the
FAX/MFC. The display will then alternate between
- Connect to PC
- Connect to LAN
Select the number for your preferred connection and press the “Set” key. A
submenu appears on the LCD so you can select the resolution and the scan to
format. Use the arrows keys to scroll through the options.
1. B/W STD (200x100dpi Black and White)
2. B/W FINE (200x200dpi Black and White)
3. COLOR STD (150x150dpi Color)
4. COLOR FINE (300x300dpi Color)
5. COLOR S.FINE (600x600dpi Color)
* Options 3-5 are only available for the color models. You cannot set the
resolution set by the Fax Resolution key. Step 1 and 2 are sent in TIFF-F format
and options 3-5 are sent in JPEG format.
Select the number for your preferred resolution and format and press the “Set”
key.
If you have already programmed this information into the FAX/MFC as a One
Touch
or Speed Dial, simply select the appropriate Dial location and press “Fax Start”.
To manually enter the address, continue to the following step.