Brother NC8100H Network Card User Manual


 
CHAPTER 9 NOVELL NETWARE PRINTING
9-7
Configuring the Brother Print / Fax server
(Queue Server Mode in NDS mode) using
BRAdmin
1. Make sure that you logged in as ADMIN in NDS mode.
2. Start BRAdmin.
3. One or more Print / Fax server services will appear in the list of printers
(the default node names are BRN_xxxxxx, where "xxxxxx" is the last
six digits of the Ethernet address (MAC address)).
You can find the node name and MAC address by printing out the FAX/MFCs
configuration page. Refer to the Quick Network Setup Guide for information on
how to print the configuration page on your Print / Fax server.
4. Select the printer that you wish to configure and double click it. You will
be asked for a password. The default password is "access".
5. Select the NetWare tab.
a. If it is not already selected, select Queue Server mode.
b. Select the correct NDS tree and NDS context (you can manually
enter this information, or by clicking on the down arrow by the side
of NDS tree and the Change button by the side of NDS Context,
you can let BRAdmin display your choices automatically. Once you
have specified this information, click on the Change NDS queues
button.
c. In the NetWare Print Queues screen select the appropriate TREE
and Context and then Click the New Queue button.
d. Enter the queue name and specify the volume name. If you do not
know the volume name, select the Browse button to browse the
NetWare volumes. When the information is entered correctly, select
the OK button.
e. Your queue name will appear in the TREE and Context that you
specified. Select the queue and click on Add. The queue name will
then be transferred to the Service Print Queues Window. You will
be able to see the TREE and Context information along with the
queue name information in this Window.
f. Click on the Close button. Your Brother Print / Fax server will now
log into the appropriate NetWare server.
Now exit the BRAdmin application. You are ready to print.