Filter
Top Products
USER’S GUIDE
4–26
The following settings can be made in this mode:
Display Message Page Format Mode
PAPER =LETTER Set cut sheet paper size to letter, A4, legal,
B5, A5, B6, A6, or executive, or envelope
size to COM10, Monarch, C5, or DL.
LEFT M = 0C P Set the left margin at column 0-126 at
10cpi.
RIGHT M = 80C P Set the right margin at column 10-136 at
10cpi. See “List of Factory Settings” in this
chapter.
TOP M =0.5" P Set the top margin at a distance from the top
edge of the paper: 0, 0.33, 0.5, 1.0, 1.5, or
2.0 inches. factory setting = 0.33 (Non-
HP), 0.5 (HP)
BOTTOM M=0.5" P Set the bottom margin at a distance from the
bottom edge of the paper: 0, 0.33, 0.5, 1.0,
1.5, or 2.0 inches. factory setting = 0.33
(Non-HP), 0.5 (HP)
LINES = 60L P Set the number of lines per page from 5 to
128 lines. See “List of Factory Settings” in
this chapter.
The letter “P” in the display messages indicates that the page orientation is
portrait. The letter “L” is displayed when it is landscape.
Display Message Page Format Mode (Continued)
X OFFSET= 0 Move the print start position (at the upper
left corner on pages) horizontally up to
-500 dots to the left or +500 dots to the
right in 300dpi dot unit increments: factory
setting = 0.
Y OFFSET= 0 Move the print start position (at the upper
left corner on pages) vertically up to -500
dots downward or +500 dots upward in
300dpi dot increments: factory setting = 0.