Filter
Top Products
USER’S GUIDE
4–2
Display
The display usually shows the current printer status. When you operate the
control panel, you can change settings interactively on the display.
When you turn the printer off-line, the display changes to show the
currently selected emulation and informs you that you can make settings
in the current emulation.
If any problems occur, the display shows the corresponding operator call,
error, or service call message to prompt you to take an action. For more
information on these messages, see “TROUBLESHOOTING” in Chapter
7.
Printer Status Messages
The following table shows the printer status messages that are displayed
during normal operation:
Printer Status Message Meaning
00 READY 001P T1 The printer is ready to print.
00 IDLE 001P T1 The printer is idle. (BR-Script 2 mode
only)
AUTO LaserJet 5 The printer is off-line and currently in HP
LaserJet mode under AUTO emulation
mode selected.
HP LaserJet 5 The printer is off-line and in HP LaserJet
mode under HP LaserJet emulation mode
selected.
00 BUSY 001P T1 The printer is busy. (BR-Script 2 mode
only)
00 SLEEP 001P T1 The printer is in sleep status (power save
mode).
01 PRINT 001P T1 The printer is printing.
01 PR300 001P T1 The printer is printing by decreasing the
resolution from more than 600 dpi to 300
dpi because of insufficient memory.
01 SX 001P T1 The printer is printing in simplex mode
due to insufficient memory for the
selected duplex mode.
02 WAIT 001P T1 The printer is warming up.
04 SELF TEST The printer is performing self-diagnosis.