Brother QL-500 Printer User Manual


 
CHAPTER 2 GETTING STARTED
2–19
Printing the Test Patterns or Lists
You can check print quality and print a list of available fonts before you
actually start working with the printer. To do so, follow these steps:
1.Make sure that you have already set the toner cartridge and loaded
paper into the cassette or the multi-purpose tray.
2Turn on the printer. Wait until the display shows the message as
follows.
LJ READY 001P T1
or
LJ READY 001P MP
3.Press the SEL switch to set the printer off-line.
The ON LINE lamp goes off.
4.Hold down the SHIFT switch and press the TEST switch.
5.Press the or switch to scroll through the display until the desired
message appears. To print your selection, press the SET switch.
Choose from one of the following selections :
To print out the demo page,
DEMO PAGE
To print out the test pattern,
TEST PRINT
To print out the list of printer settings,
PRINT CONFIG
To print out the list of internal or resident fonts,
PRINT FONTS I