Filter
Top Products
USER’S GUIDE
4–74
FEEDER Switch
You can select the feeder, manual feed mode, or MP tray settings with the
FEEDER switch, and also select the duplex printing mode if the optional
duplex printing unit is installed.
Display Message Feeder
FEEDER=AUTO Select a feeder or auto paper feed.
MP FIRST=OFF Turns MP first on or off.
MANUAL FEED=OFF Turns manual feed on or off.
MP TRAY SETTING MP tray settings
TRAY SETTING Tray 1, Tray 2 settings
MEDIA TYPE Select print media
DUPLEX MODE Selects duplex printing mode (only
with the duplex option installed.)
You can check the current feeder and the duplex mode on the display.
When tray 1 has been selected, the display may look as follows:
00 READY 001P T1
When the multi-purpose tray and the duplex printing mode have been
selected, the display may look as follows:
00 READY 001P■MP
The black square ■ indicates that duplex printing mode is selected.
When you want to change settings with the FEEDER switch, hold down
the SHIFT switch and press the FEEDER switch. You will then enter the
setting mode where you change the feeder, manual feed mode, etc.
FEEDER
To select the feeder, follow these steps:
1. Press the SEL switch to set the printer off-line.
2. Hold down the SHIFT switch and press the FEEDER switch.
When you enter the setting mode, the display first shows the current
feeder setting with the asterisk.