Filter
Top Products
APPENDICES
Appendix–71
■ Bar Code, Expanded Character, Line Block Drawing & Box Drawing
Offset in X-axis
n = “xnnn” or “Xnnn”
This parameter specifies the offset from the left margin in the “u”- or
“U”-specified unit.
■ Bar Code & Expanded Character Offset in Y-axis
n = “ynnn” or “Ynnn”
This parameter specifies the downward offset from the current print
position in the “u”- or “U”-specified unit.
■ Bar Code, Expanded Character, Line Block Drawing & Box Drawing
Height
n = “hnnn”, “Hnnn”, “dnnn”, or “Dnnn”
(1) EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-A),
ISBN (UPC-E): 22 mm
(2) UPC-E: 18 mm
(3) Others: 12 mm
Expanded characters ➞ 2.2 mm (default)
Line Block Drawing & Box Drawing ➞ 1 dot
This parameter specifies the height of bar codes or expanded
characters as above. It can take the prefix “h”, “H”, “d”, or “D”. The
height of bar codes is specified in the “u”- or “U”-specified unit. Note
that the default setting of the bar code height (12 mm, 18 mm or 22
mm) is subject to the bar code mode selected by “t” or “T”.
■ Expanded Character Width, Line Block Drawing & Box Drawing
n = “wnnn” or “Wnnn”
Expanded character ➞ 1.2 mm
Line Block Drawing & Box Drawing ➞ 1 dot
This parameter specifies the width of expanded characters as above.