Brother QL-500 Printer User Manual


 
USER’S GUIDE
4–12
Mode Menu (Continued) Setting Menu Sub-Setting Menu Setting
CARD OPERATION When the commercial flash memory card or the HDD card has been formatted:
(HP mode only) EXECUTE DATA Execute the data on the card.
DATA ID=##### Execute the selected data.
exit Exit to EXECUTE DATA
CARD LIST Print the contents of the card.
SAVE SAVE DATA Send data to be saved.
SET KEY--> END End saving the data.
DATA ID=##### Set data ID for saved data.
SAVE MACRO Save a macro.
MACRO ID=##### Set macro ID for saved macro.
PRIMARY FONT Save primary font.
FONT ID=##### Set primary font ID for saved
font.
SECONDARY FONT Save secondary font.
FONT ID=##### Set secondary font ID for saved
font.
DOWNLOAD FONT Save download font.
FONT ID=##### Set download font ID for saved
font.
exit Exit to CARD 1 (2) OPERATION
DELETE MACRO ID=##### Delete the selected macro.
DATA ID=#### Delete the selected data.
FONT ID=##### Delete the selected font.
FORMAT CARD Format the flash card.
SET –> DELETE ALL Execute formatting the card.
exit Exit to FORMAT CARD
exit Exit to CARD 1 (2) OPERATION
ADVANCED MODE NETWORK MODE LOCK PANEL=OFF ON or OFF
(See 4-46.) PASS NO=### Enter pass number.
AUTO FF=OFF ON or OFF
WAIT TIME= 5s 1 to 99 seconds for AUTO ON
FF SUPPRESS=OFF ON or OFF
TONER LOW=CONT CONT or STOP
exit exit to NETWORK MODE
CONTINUE MODE CONTINUE=MANUAL AUTO or MANUAL
SCALABLE FONT FONT=ALL ALL, LJ4
PRINT DENSITY
■■■■■
Increase or decrease the print
density. (15 levels)
INPUT BUFFER
❏❏❏❏❏
Increase or decrease the input
buffer capacity. (15 levels)
SAVE SETTINGS SAVE SETTING 1 Save the current setting as #1
SAVE SETTING 2 Save the current settings as #2
exit exit to ADVANCED MODE
PAGE COUNTER
(See 4-52.)
COUNT= 0 Shows the number of printed
pages.
exit MODE Exit MODE.
(See 4-52.)