Filter
Top Products
USER’S GUIDE
4–44
FONT Switch
Pressing the FONT switch allows you to select fonts and
symbol/character sets.
✒ Notes
When you use the FONT switch, note the following:
• The FONT switch is effective in the HP LaserJet 4, EPSON FX-
850, and IBM Proprinter XL modes. However the settings are
subject to the current emulation mode.
• If the application software supports font and symbol/character set
selection, you do not need to set them with the FONT switch. The
software or command setting overrides the switch setting.
• If you want to use optional fonts other than the printer’s resident
fonts, be sure to install a font cartridge/card that has your desired
fonts. The printer automatically selects the font that has exactly
the same or similar characteristics as those you set through the
software or with a command. If the installed font cartridge/card
happens to have a font of similar characteristics, the printer will
print with an unexpected font.
• You can store the fonts you require on a flash memory card or a
HDD card only in the HP LaserJet 4 mode when one is installed.
See “CARD OPERATION.”
Setting the Font and Symbol Set in the HP LaserJet 4 Mode
When the HP LaserJet 4 emulation mode has been selected, the font
and symbol set can be set separately as the primary or secondary font.
The display shows the following setting menus:
PRIMARY FONT SELECT FONT p Set the primary font.
SYMBOL SET p Set the symbol set.
TABLE PRINT p Print the code table.
exit Exit