Filter
Top Products
USER’S GUIDE
4–14
Operation Example: Selecting the Parallel Interface
For this session, select the parallel interface manually as follows:
1. Press the SEL switch to set the printer off-line.
2. Press the MODE switch.
The display shows the first menu.
INTERFACE MODE
3. Press the SET switch.
When you enter the interface mode, the display first shows the
current interface with the asterisk.
I/F=AUTO *
4. Press the ▲ or ▼ switch until the desired interface appears on the
display.
I/F=PARALLEL
Display Message Interface Mode
I/F=PARALLEL Parallel interface
I/F=RS-232C Serial interface
I/F=AUTO Auto interface selection
5. Press the SET switch to make the displayed selection effective.
An asterisk appears at the end of the display for a short time. Then
the printer automatically exits from the setting menu to the
interface menu.
INTERFACE MODE