Filter
Top Products
USER’S GUIDE
4–70
2. Press the SET switch to enter the media type mode. The display
then shows the current setting with an asterisk:
REGULAR *
3. Press the ▲ or ▼ switch to select regular, thick paper, or
transparency.
4. Press the SET switch to make the setting effective.
✒ Notes
• Please do not forget to change the setting back after you print your
special media with the setting changed.
• Envelopes can not be fed from the Tray 2 although you can set
them in it.
• You must not load transparencies into tray 1 or tray 2. Please use
the multi-purpose tray.
DUPLEX MODE
If the optional duplex printing unit has been installed, the duplex
mode appears on the display as follows:
DUPLEX MODE
1. Press the SET switch to enter the duplex mode menu.
Then the display shows the current selection for the duplex
printing or simplex printing (duplex off) with an asterisk as
follows:
DUPLEX=OFF *
2. Press the ▲ or ▼ switch to select the duplex or simplex (duplex
off), and press the SET switch.
When you set the “DUPLEX=ON”, the display shows the current
bind setting with an asterisk as follows:
BIND=LONG *
3. Press the ▲ or ▼ switch to select long edge binding or short edge
binding.