Filter
Top Products
USER’S GUIDE
4–50
3. Press the SET switch.
When you enter the “SELECT FONT” menu, you can select the
internal font, optional slot font, or permanent download font. The
display shows the following message.
INTERNAL FONT *
Press the ▲ or ▼ switch until the desired font source appears on
the display.
Display Message Font Source
INTERNAL FONT Internal font of the printer
SLOTFONT A Optional card font in the upper slot
A
SLOTFONT B Optional cartridge font in the lower
slot B
PERMANENT FONT Permanent download font defined in
the HP emulation mode
Since these steps instruct you to select the standard font, select the
“INTERNAL FONT” message.
✒ Notes
When you select the optional fonts or permanent download fonts, note
the following:
• If the optional font cartridge/card is not installed, the optional font
cannot be selected. No selection appears on the display.
• If permanent fonts are not downloaded in the HP emulation mode
or another emulation mode is selected, the permanent fonts cannot
be selected. No selection appears on the display.
• When you select the optional font or download font, press the SET
switch to enter the sub-menu. After you select your desired one
with the ▲ or ▼ switch, press the SET switch again. The list you
can print out with the TEST switch helps you to select the optional
fonts or permanent download fonts. See “TEST switch” in this
chapter or “Selecting the Optional Fonts” in Chapter 5.
4. Press the SET switch.
When you enter the font setting mode, the display first shows the
current font with an asterisk.