Filter
Top Products
CHAPTER 5 OPTIONS
5–9
7. Install as many SIMMs as you need.
• Set a SIMM into the slot at an angle.
• Push the tip gently towards the vertical until it clicks into
place.
✒ Notes
• When you install less than three SIMMs, be sure to install them
in the order of slots 1, 2, and 3.
• When you install different capacities of SIMMs, be sure to install
the larger capacity SIMMs in the lower socket and smaller
capacity SIMMs in order in the upper sockets.
Fig. 5-7 Installing the SIMMs
8. Refit the metal plate and secure it with the screws.
9. Refit the left side cover to the printer.
10.Plug in the power cord and turn on the printer.
If you have installed the SIMMs incorrectly, the printer prints a
report to alert you.
SIMM
Slot 1
Slot
2
Slot
3