Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–25
✒ Notes
• When another pen is selected, the display shows the selected pen
with the number after “SIZE’ or “GRAY.”
• Whichever resolution, 300 or 600 dpi, you have selected, the pen
size takes effect in units of 300 dpi.
■ Character Set
When you select “CHARACTER SET,” you can select the standard and
alternate character sets used in the HP-GL emulation mode.
Enter the sub-setting menu and select the menu for the standard or
alternate character set with the ▲ or ▼ switch:
To set the standard character set, select the following message:
STANDARD SET
or
To set the alternate character set, select the following message:
ALTERNATE SET
Then press the SET switch to show the following message:
ANSI ASCII *
Change the character set with the ▲ or ▼ switch and make the
selection effective by pressing the SET switch. For specific character
sets, see “SYMBOL/CHARACTER SETS” in Appendix.