Filter
Top Products
USER’S GUIDE
4–68
• You can set “MP FIRST=ON” so that you can use the MP tray
paper first until it becomes empty and then switch to other paper
sources which hold the same size of paper. You can set “MP
FIRST=ON” for this purpose only when all the trays hold the
same type and size of paper. When the MP tray paper size is
different from paper in other trays, you must not select “ON” if
you do not want to use MP tray paper.
2. Press the SET switch.
MANUAL FEED
The display shows manual feed mode with an asterisk as follows:
MANUAL FEED=OFF*
1. Press the ▲ or ▼ switch to turn the manual feed mode on or off.
2. Press the SET switch to make the setting effective.
✒ Note
When you select the “MANUAL FEED=ON”, note that the feeder set
in the “FEEDER=####” menu is ignored and the manual feed mode
from the multi-purpose tray is selected. You must set “MANUAL
FEED=OFF” so that the feeder selection in the “FEEDER=####”
menu can be effective.
MP TRAY SETTING
1. The display then shows the MP tray setting menu. Press the SET
switch to enter this menu.
Then the display shows the current paper size setting for the
multi-purpose tray with an asterisk.
MP SIZE=LETTER *