Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–31
DATA ID=#####
Select the ID with the ▲ or ▼ switch and press the SET switch again,
so that the printer executes the selected data.
✒ Note
PostScript
®
language data can not be printed correctly with this
printer because it does not have BR-Script emulation.
■ Card List
When you select “CARD LIST” and you press the SET switch, the
printer automatically loads paper and starts printing the contents of
the installed flash memory card or HDD card. You can check the
contents and the unused capacity of the card.
■ Save
When you select “SAVE” and you press the SET switch, you can enter
the following sub-setting menus to save the macros and fonts in the
installed card:
Display Message Save Menu
SAVE DATA Save data that the printer will receive and
set its ID.
SAVE MACRO Save a macro. This menu appears only in
the HP LaserJet 4 emulation mode.
PRIMARY FONT Save the primary font selected with the
FONT switch. This menu appears only in
the HP LaserJet 4 emulation mode.
SECONDARY FONT Save the secondary font selected with the
FONT switch. This menu appears only in
the HP LaserJet 4 emulation mode.
DOWNLOAD FONT Save a download font. This menu appears
only in the HP LaserJet 4 emulation mode.
✒ Note
If the capacity of the card becomes low while macros and fonts are
being saved, the display shows the “CARD FULL” error message and
they cannot be saved. Use a new card or delete unnecessary macros
and fonts from the card. The CARD LIST displays the contents and
the used capacity.