Filter
Top Products
USER’S GUIDE
3–16
Fig. 3-5 Cassette Feed
Manual Feed
When you set paper in the multi-purpose tray with the setting
MANUAL FEED = ON selected with the FEEDER switch, the printer
loads paper only from the multi-purpose tray regardless of the previous
feeder selection. When you select the setting PAPER IN = CONT in the
MP TRAY SETTING mode, the printer loads paper automatically from
the multi-purpose tray. When you select the setting PAPER IN = STOP,
the printer waits for you to press the SEL key to start printing. You can
set the paper feed mode and the paper size with the FEEDER switch. For
further information, see “FEEDER Switch” in Chapter 4.
✒ Notes
When you feed paper manually, note the following:
• If your application software supports a manual feed selection in the
print menu, you can select it through the software. Since the software
or command setting overrides the switch setting, you do not need to
set the manual feed mode and the paper size with the FEEDER
switch.
• If you use pre-printed paper in the multipurpose tray, please note that
it is inserted with the pre-printed side face up. Insert the top of the
page towards the printer in the multi-purpose tray.
Multi-purpose
Tray (MP)
Upper Paper
Cassette (Tray 1)
Lower Paper
Cassette (Tray 2)