Filter
Top Products
USER’S GUIDE
5–2
FONT CARTRIDGE/CARD, FLASH MEMORY/HDD CARD
Installing a Font Cartridge/Card, Flash Memory Card and HDD Card
This printer has one slot for an optional font cartridge and one slot
for an optional font card, flash memory card or HDD card.
If you install the optional font cartridge/card, you can use the fonts
stored in them as well as resident fonts. For optional font
cartridges/cards, consult the dealer where you purchased the printer.
If you install the optional flash memory card or HDD card, you can
save macros and fonts on it. For flash memory card and HDD card
operation and information, see “CARD OPERATION” in Chapter 4.
✒ Notes
• Do not install or remove cards with the printer power on, or you
may lose all data from the card, or may seriously damage the card
if you do this.
• For more information about the cards, consult the dealer where
you purchased the printer.
Follow these steps to install or remove a cartridge/card:
1. Make sure that the printer is turned off.
If the printer is turned on, be sure to press the SEL switch to set
the printer off-line. If data remains in the printer memory, the
DATA lamp stays on. Press the FORM FEED switch to print out
the remaining data, then the DATA lamp goes off. Turn off the
printer.
2. Insert the font card, flash memory card or HDD card into the
upper slot A and the font cartridge into the lower slot B with the
cartridge/card label facing to the left. Make sure they fit securely.
To remove the cartridge/card, pull them out of the slot with the
printer turned off.