Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–81
✒ Notes
The message “PRINT FONTS C” or “PRINT FONTS P” appears only
when the optional font cartridge/card is installed in the font slot or
permanent download fonts are stored in printer memory.
• If the optional font cartridge/card is installed, you can print out the
list of optional fonts. Since the list shows the ID numbers specific
to each optional font, it helps you to select them with the FONT
switch. For further information, see “FONT Switch” in Chapter 4
and “FONT CARTRIDGE/CARD, FLASH MEMORY/HDD CARD”
in Chapter 5.
• If user-defined characters are already downloaded into the printer
memory as permanent download fonts, you can print out the list of
them. For further information, see “FONT Switch” in Chapter 4
and Technical Reference Manual that is optionally available.
4. Press the SET switch to make the displayed selection effective.
The printer prints out the test patterns or lists according to the
selected test mode.
■ When the “TEST PRINT” mode has been selected, the display
shows the following message and the printer starts printing out
the test pattern.
05 TEST PRINT
■When the “PRINT CONFIG” mode has been selected, the display
shows the following message and the printer starts printing out
the list of printer settings.
06 PRINT CONFIG
✒ Note
The printed list shows the panel switch settings you have made as
user settings with the MODE switch. See “SAVE SETTINGS” in
Chapter 4.