Filter
Top Products
USER’S GUIDE
4–8
MODE Switch Settings in HP LaserJet 4, EPSON FX-850, and IBM
Proprinter XL Modes
The following table shows all the selections you can make with the
MODE switch in the HP LaserJet 4, EPSON FX-850, and IBM
Proprinter XL modes.
✒ Note
The mode menus and settings that can appear vary according to the
current emulation mode, printer status, and any options that may be
installed in the printer.
Mode Menu Setting Menu Sub-Setting Menu
Setting
INTERFACE MODE I/F=PARALLEL HIGH SPEED=ON
ON or OFF
(See 4-15.) BI-DIR=ON
ON or OFF
I/F=RS-232C BaudRate= 9600
150, 300, 600, 1200, 2400,
4800, 9600, 19200, 38400, or
57600 baud
CodeType=8 bits
7 or 8 bits
Parity =NONE
NONE, EVEN, or ODD
Stop Bit=1 bits
1 or 2 stop bits
Xon/Xoff=ON
ON or OFF
DTR (ER)=ON
ON or OFF
Robust Xon=OFF
ON or OFF
exit
Exit to INTERFACE MODE
I/F=AUTO TIME OUT= 5s
1 to 99 seconds
PRL Setting
Bi-directional settings for
AUTO
HIGH SPEED=ON
ON or OFF
BI-DIR=ON
ON or OFF
exit
Exit to PRL Setting
RS-232C Setting
Parameters for AUTO mode
BaudRate= 9600
150, 300, 600, 1200, 2400,
4800, 9600, 19200, 38400, or
57600 baud
CodeType=8 bits
7 or 8 bits
Parity =NONE
NONE, EVEN, or ODD
Stop Bit=1 bits
1 or 2 stop bits
Xon/Xoff=ON
ON or OFF
DTR (ER)=ON
ON or OFF
Robust Xon=OFF
ON or OFF
exit
Exit to RS-232C Setting