Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–49
TABLE PRINT p
12.Press the SET switch to start printing the code table of the selected
font, or press the ▲ or ▼ switch to skip this menu.
The display shows the exit menu.
exit
13.Press the SET switch to exit from the setting mode.
The printer returns to the off-line state.
Setting the Font and Character Set in the, EPSON FX-850, or IBM
Proprinter XL Mode
When the EPSON FX-850 or IBM Proprinter XL mode has been
selected, the font and character set can be selected.
The display shows the following setting menus.
SELECT FONT Select the font.
CHARACTER SET Select the character set.
TABLE PRINT Print the code table.
exit Exit
To select the font and character set in the EPSON
FX-850 or IBM Proprinter XL mode, follow these steps:
1. Press the SEL switch to set the printer off-line.
2. Press the FONT switch.
The display shows the font setting menu. You can skip the font
setting menu and advance to the character set setting menu with
the ▲ or ▼ switch. For this session, go to the next step.
SELECT FONT