Filter
Top Products
USER’S GUIDE
4–62
If the function is turned on, the downloaded macros and fonts are
kept in the printer’s memory until the printer is turned off, so that
they are not cleared by switching to the other emulations.
✒ Note
The “KEEP PCL” function reserves free space in the printer’s memory
and may cause a memory full error. If a memory full error occurs,
expand the memory capacity or turn off this function.
10.Press the SET switch.
The “exit” message appears on the display.
11.Press the SET switch again.
The printer exits from the setting mode to the off-line state.
✒ Note
When you use the automatic emulation selection, try it with your
application software or network server. If the function does not work
properly, select a particular emulation mode manually. You can use
the following commands to select the emulation on the network.
Commands Hex Emulation
ESC CR H 1B 0D 48 HP LaserJet 4
ESC CR GL1B 0D 47 4C HP-GL
ESC CR E 1B 0D 45 EPSON FX-850
ESC CR I 1B 0D 49 IBM Proprinter XL
About Emulation Modes
This printer has the following emulation modes:
■ HP LaserJet 4 Mode
The HP LaserJet 4 mode (or HP mode) is the emulation mode where
this printer emulates the Hewlett-Packard LaserJet 4 laser printer.
Since a large number of application software packages support this
type of laser printer, your printer will operate at its optimum
performance in this mode.