Brother HL-1260 Printer User Manual


 
USER’S GUIDE
3–4
Notes
When you use the automatic emulation selection, note the following:
Once the emulation is automatically changed, it is not changed again
for a short period of time. This time period is called “Time Out” and it
can be set with the EMULATION switch. The factory setting is 5
seconds.
The EPSON or IBM emulation mode priority must be selected, as the
printer cannot distinguish between them. Since the factory setting is the
EPSON emulation mode, you might need to select the IBM emulation
mode with the EMULATION switch when you need to use this
emulation..
Try this function with your application software or network server. If
the function does not work properly, select the required emulation mode
manually using the printer panel switches or use emulation selection
commands from your software.