Filter
Top Products
USER’S GUIDE
4–6
✒ Notes
When you press the SEL switch, remember the following:
• All other switches—except the SEL switch—are operational only when
the printer is off-line.
• If the printer is not in auto emulation mode, the LCD displays the current
emulation by pressing the SEL key to take it off-line, but you cannot
enter other emulation modes. To make settings in other emulation
modes, press the EMULATION switch and select the emulation.
• The SEL switch works as a “quick exit” switch. If you are lost in the
display menus or you want to quickly exit the display menu, press the
SEL switch. You can exit quickly from any depth of the display menu to
the on-line ready state. If you have already made a setting effective by
pressing the SET switch and then press the SEL switch to quickly exit,
your setting (whether made by accident or on purpose) will remain
effective. Pressing the SEL switch will not cancel any setting.
SET Switch
Pressing the SET switch allows you to select certain items on the display or
make the displayed menu or setting effective. The switch also works as an
execute switch to perform the displayed function.
When you press the SET switch, the printer stores the settings you have
selected into the memory as “User Settings.” Every time you turn on the
printer, it is reset according to these user settings. They remain effective
until you make new settings or restore them to the factory settings. For
factory reset, see “RESET Switch” in this chapter.
✒ Note
When you press the SET switch to select a setting, an asterisk appears at the
end of display for a short time. Since the asterisk indicates the selection, you
can easily find the current setting when you scroll through the display.
▲▲ (UP) or ▼▼ (DOWN) Switch
Pressing ▲ (UP) or ▼ (DOWN) switch scrolls the menus and settings
forward or backward respectively on the display. Press or keep pressing the
switch until you access the desired item.