Filter
Top Products
VI - 21
YesIs the static-charge eliminator dirty?
Possible cause Step Check Result Remedy
Static-charge
eliminator
1 Is a recommended type of paper being used? Instruct the user to use
recommended type of paper.
2
Clean the static-charge
eliminator.
Separation and feed block (Paper jam)J-2
No
Print Paper
No Replace the transfer base assy.
Possible cause Step Check Result Remedy
Fixing unit
entrance guide
1 Yes
2
J-3
Replace the fixing unit.
Clean the entrance guide.
Yes
3
Is the separation guide worn or deformed?
Is the paper sensor arm movement smooth?
Yes
Replace the fixing unit.
Fixing and paper delivery block (Paper jam)
4
No
Replace the jam remove cover
and the rear cover assy.
5
Is the entrance guide dirty?
Paper delivery
actuator
No
Replace the changeover
guide.
Is the changeover guide movement smooth?
Is the delivery roller movement smooth?
Are there dirts or flaws on the ribs of the jam
remove cover and rear cover?
Delivery rollers
Changeover
guide
No
Replace the rear cover assy.
Paper jam
remove cover
Rear cover
Separation
guide
Fixing unit