Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–63
CONTINUE Switch
If there is a problem with the printer, it automatically suspends printing and
goes off-line. Pressing the CONTINUE switch may ignore the error and
resume printer operation.
The function of this switch varies according to the CONTINUE mode set
with the MODE switch.
Since the CONTINUE mode has been factory set to MANUAL, you need to
press the CONTINUE switch to recover from a printer error message. If you
set the mode to AUTO, the printer attempts to resume the operation without
pressing the CONTINUE switch.
For further information, see “CONTINUE MODE” in Chapter 4.
✒ Note
The CONTINUE switch is not a cure-all. The printer cannot recover from
some errors. Take corrective action, referring to the error message. See
“TROUBLESHOOTING” in Chapter 7.