Filter
Top Products
IV - 13
1.17 Regist sensor actuator
(1) Remove the actuator by shifting it to the left from the chassis hole.
1.18 MP Paper Detection Actuator
(1) Remove the actuator by removing the 2 bearings from the roller holder.
This operation should be carried out with the PCB removed.
1.19 PE Sensor Actuator MP
(1) Pull out the actuator by shifting it to the right from the chassis hole.
Figure 4.30
Figure 4.31
Figure 4.29
MP paper detection actuator
Roller holder
MP paper detection actuator
PE sensor actuator MP
Regist sensor actuator
Regist sensor actuator
PE sensor actuator MP