Filter
Top Products
USER’S GUIDE
4–32
The page protection function reserves additional memory so that the printer
can create the entire page image in memory before physically printing it out.
This function can be set for letter, A4, or legal size paper. Select the paper
size for page protection.
Display Message Page Protection
PROTECT=AUTO Page protection on only when it is necessary.
(Factory setting)
PROTECT=LETTER Page protection on for letter size paper.
PROTECT=A4 Page protection on for A4 size paper.
PROTECT=LEGAL Page protection on for legal size paper.
PROTECT=OFF Page protection off
To protect pages, you need the memory capacity as shown in the following
table:
Protection 300 dpi 600 dpi
Off 2 Mbytes 2 Mbytes
Letter or A4 2 Mbytes 6 Mbytes
Legal 3 Mbytes 6 Mbytes
(Duplex) 4 Mbytes 10 Mbytes
✒ Notes
When you use the page protection function, note the following:
• When you want to print at 600 dpi with the page protection function on,
be sure to expand the memory capacity to a minimum of 6 Mbytes; or
the resolution is automatically reduced to 300 dpi for printouts.
• If the function setting is changed, all download fonts and macros—
including permanent ones—are cleared. If the memory is too low to
protect pages, page protection does not take effect.
CARD OPERATION
✒ Notes
• BE SURE TO TURN OFF THE PRINTER POWER SWITCH
BEFORE INSTALLING OR REMOVING THE FLASH MEMORY
CARD OR HDD CARD, OR THE CARD WILL BE DAMAGED.
• The settings in this mode menu are effective only when you have
installed a flash memory card or a HDD card in the card slot of the
printer and you have selected the HP LaserJet 4+, HP-GL, or BR-Script
2 mode. They do not appear when the printer has no card or is in any
other emulation mode.